Modified Polyethylene Coating for the Interior of Fire Extinguisher
product description
The modified polyethylene powder coating applied to the inside of fire extinguisher is a thermoplastic powder coating prepared from polyethylene resin, compatibilizers, functional additives, pigments and fillers. It exhibits excellent adhesion and corrosion resistance, along with superior chemical stability, electrical insulation properties, and low-temperature performance.
Application area
For application on the interior coating of fire extinguisher cylinders.
Product property
Non-volatile content: ≥99.5%
Dry fluidization: Fluidized floating rate ≥20%
Proportion: 0.91–0.95 (varies by color)
Particle size distribution: ≤300 μm
Melt flow index: ≤10 g/10 min (2.16 kg, 190°C) [Depends on the workpiece to be coated and customer’s process]
Storage: Store below 35°C in a well-ventilated and dry indoor environment, away from sources of ignition. The shelf life is two years from the date of production. Upon expiration, the product may be reused if retested and found compliant. It is recommended to follow the first-in, first-out principle for product usage.
Process requirements
Pre-treatment: degreasing, rust removal, phosphating;
Workpiece preheating temperature: 250–300°C [adjust according to cylinder specifications];
Coating methods: roll coating, pressure spray coating;
Plasticizing: 180–220°C, 0–5 minutes [adjust according to cylinder specifications; the subsequent heating and plasticizing step facilitates the formation of a smooth coating on the metal workpiece surface].
Cooling: Air-cooled or naturally cooled;
Film properties
The sample preparation conditions for the following data: a 2 mm thick steel plate with degreased and rust-removal surfaces, coated under standard construction conditions, achieving a film thickness of 400 μm.
|
Color |
GB/T 9761 |
No significant difference was observed with eye inspection(when compared with the template preparation). |
|
|
Appearance |
Visual inspection |
Flat and smooth (slight orange peel texture allowed) |
|
|
Coating thickness um |
GB/T 13452.2 |
250-600 |
|
|
Glossiness % |
GB/T 9754,60° |
10–80 Subject to adjustment based on specific customer’s requirments |
|
|
Bending (film thickness 200 μm) |
GB/T 6742 |
≤2mm |
|
|
Shore hardness (D) |
GB/T 2411 |
45–55 (Subject to adjustment based on specific customer’s requirments) |
|
|
Low-temperature embrittlement susceptibility |
Q/HJ 008-2008 |
No cracks observed at-35°C for 60 hours. |
|
|
Adhesion |
10 mm wide, 180°peel-off |
≥3 kg/10 mm (coating rupture or fragmentation indicates acceptable adhension) |
|
|
Resistant to high and low temperature testing |
-30~20℃-60~20℃ |
After 8 temperature cycles, the coating showed no cracking or detachment. |
|
|
Chemical-resistant |
Immerse in 5% HCl for 7 days (GB/T 11547) |
The surface coating remains unchanged. |
|
|
Immerse in 5% NaOH for 7 days (GB/T 11547) |
The surface coating remains unchanged. |
||
|
Immerse in 5% NaCl for 7 days (GB/T 11547) |
The surface coating remains unchanged. |
||








