Thermoplastic Polypropylene (PP) Modified Powder Coating
Product description
A thermoplastic powder coating prepared from polypropylene, compatibilizers, functional additives, pigments and fillers for thermoplastic polypropylene modified powder coatings; the product exhibits excellent corrosion resistance and mechanical properties, as well as high hardness and wear resistance.
Application area
Coating for dishwashers' inner tray racks, metal furniture, and metal workpieces requiring certain wear resistance and high hardness.
Product property
Non-volatile matter content: ≥99.5%
Dry fluidization: Fluidized floating rate ≥20%
Specific gravity: 0.9–0.98 g/cm³ (varies depending on color)
Melting point: 100–160°C
Particle size distribution: ≤250 μm
Storage: Store in a cool, well-ventilated, and dry indoor environment below 35°C, away from sources of ignition. The shelf life is two years from the date of production. Upon expiration, the product may be reused if retested and found compliant. It is recommended to follow the first-in-first-out principle for product usage.
Process requirements
Pre-treatment: Thoroughly degrease and remove rust. To achieve optimal adhesion of the coating film, phosphating treatment is recommended for the substrate.
The surface temperature of the workpiece after preheating: 250–400°C [adjust according to the workpiece's heat capacity (i.e., metal thickness); for workpieces with significant diameter differences, the preheating temperature may be increased to 450°C, but the heating time should be shortened].
Fluidized bed dip coating: 4–8 seconds [adjust according to the metal thickness and shape of the workpiece]; also suitable for electrostatic spraying applications.
Plasticizing: 200±20°C, 0–5 minutes [A subsequent heating and plasticizing step is required to obtain a smooth coating on thin metal workpieces].
Cooling: Air-cooled or naturally cooled;
Film properties
The sample preparation conditions for the following data: a 2 mm thick steel plate with degreased and de-rusted surfaces, coated under standard construction conditions, with a film thickness of 400 μm.
|
Items |
Testing standard |
Test result |
|
Recommended coating thickness: μm |
GB/T 13452.2 |
250-600 um |
|
Color |
GB/T 9761 |
No obvious visual difference was observed (when compared with the sample mold). |
|
Apearance |
Visual inspection |
Flat and smooth (slight orange peel texture allowed) |
|
Glossiness % |
GB/T 9754.60 |
50~60 |
|
Bending (membrane thickness 200 μm) |
GB/T 6742 |
≤2mm |
|
Shore hardness (shoreD) |
GB/T 2411 |
60 |
|
Adhesion |
JT/T 6001 |
Level 0-1 |
|
Impact test (9 N·m) |
GB/T 18226, Section 6.3.5 |
No blistering or rusting patterns observed. |
|
Salt spray resistance (500 hours, no chipping) |
GB/T 18226 |
No blistering or rust detachment observed |
|
Weather resistance (artificial accelerated aging for 1000 hours) |
GB/T 1865 |
No blistering or cracking |
|
Resistance to environmental stress cracking |
GB 1842 |
More than 1000 hours |
|
Hot water immersion |
90°C, 10 days |
No blistering or cracking |
|
Food Contact Testing |
EU Standard |
Qualified |








