RPE—LB Thermoplastic Polyethylene Powder Coating
The RPE-LB thermoplastic polyethylene powder coating produced by our company is a specialized coating designed for galvanized metal materials. It features dual-layer corrosion protection: the substrate is steel, first protected by anti-corrosion coating followed by an organic anti-corrosion coating, ensuring tight adhesion without peeling. This coating remains colorfast and non-coked during 280°C ± 20°C immersion processes for guardrail panels and irregular components, with a smooth surface and vibrant color. The product is widely used in corrosion protection projects for highways, guardrails, airports, and outdoor landscaping facilities. (The color can be customized according to customer requirements.)
Product Technical Specifications:
|
Tes titems |
Technical requirement |
|
Average coating thickness (mm) (double coating) |
0.25~0.6 |
|
Appearance |
The coating is flat, smooth, and free of bubbles, with a soft and rich color. |
|
Sieve residue (6 0 -mesh)% |
Remnants on a 60-mesh sieve ≤5% |
|
Film Adhesion Performance |
The coating film was tightly bonded to the substrate and shows no peeling after the cross-cut test. |
|
Weather resistance |
After a 1,200-hour artificial accelerated weathering test with a cumulative total radiation energy of 4.64×10⁶ KJ/m², no significant aging phenomena were observed, meeting the relevant standard requirements. |
Dip coating process:
(1) Preheat the workpiece that has undergone pickling and phosphating treatment to 280°C ± 20°C (the specific heating temperature shall be determined according to the workpiece requirements).
(2) Immerse the preheated workpiece in the fluidized bed for 8–10 seconds, then remove it.After plasticizing and leveling at 180 ± 20°C for 6 ± 2 minutes, it is cooled with cold air or naturally.







