Weather-resistant Polyethylene Coating
Product description
The weather-resistant polyethylene powder coating is a thermoplastic powder coating prepared from polyethylene resin, compatibilizers, functional additives, pigments, and fillers. It exhibits excellent weather resistance, along with superior chemical stability, electrical insulation properties, low-temperature performance, corrosion resistance, and flexibility.
Additionally, the film's strong bonding performance can be enhanced according to user’s requirements; the product model is LN-J, featuring weather-resistant and high-bonding properties.
Application area
Applicable for coating air conditioner outdoor unit exhaust grilles, outdoor fences and similar craft items.
Product property
Non-volatile content: ≥99.5%
Dry fluidization: Fluidized floating rate ≥20%
Proportion: 0.91–0.95 (varies by color)
Particle size distribution: ≤300 μm
Melt flow index: 5–50 g/10 min (2.16 kg, 190°C) [Depends on the workpiece to be coated and customer process]
Storage: Store in a cool, well-ventilated, and dry indoor environment below 35°C, away from sources of ignition. The shelf life is two years from the date of production. Upon expiration, the product may be reused if retested and found compliant. It is recommended to follow the first-in, first-out principle for product usage.
Packaging: Composite paper bags, with a net weight of 25 kg per bag.
Process requirements
Pre-treatment: Oil removal using high-temperature or solvent methods, or chemical methods and sandblasting for rust removal; the treated substrate surface should be neutral. Workpiece preheating temperature: 250–350°C [ can be adjusted according to the workpiece heat capacity (i.e., metal thickness)].
Fluidized bed dip coating: 4–8 seconds [can be adjusted according to the metal thickness and shape of the workpiece];
Plasticizing: 180–250°C, 0–5 minutes [subsequent heating during plasticizing enhances the formation of a smooth coating on the metal workpiece surface]; Cooling: air-cooled or naturally cooled;
Film properties
The sample preparation conditions for the following data: a 2 mm thick steel plate with degreased and deburred surfaces,to be coated under standard construction conditions, achieving a film thickness of 400 μm.
|
color |
GB/T 9761 | No significant difference was observed with eye inspection(when compared with the template preparation). | |
|
Appearance |
Visual inspection | Flat and smooth (slight orange peel texture allowed) | |
|
Coating thickness um |
GB/T 13452.2 | 250-600 | |
|
Glossiness % |
GB/T 9754,60° | 10–80 (Can be adjusted according to customer’s specific requirements) | |
|
Bending (film thickness 200 μm) |
GB/T 6742 | ≤2mm | |
|
shore hardness (D) |
GB/T 2411 | 45–55 (To be adjusted if the customer has special requirements) | |
|
Low-temperature embrittlement susceptibility |
Q/HJ 008-2008 | No cracks observed at-35°C for 60 hours. | |
|
Adhesion |
10 mm wide, 180°peel-off
(Aplicable to LN-J weather-resistant adhesive type) |
≥3 kg/10 mm (coating rupture or fragmentation indicates acceptable adhension) | |
|
Salt spray test (500 hours) |
GB/T 18226 | No foaming, peeling, or rusting phenomena observed. | |
|
Refractoriness |
Artificial acceleration: 500h |
GB/T 1865 | Light loss and discoloration: Grade 1; pulverization and cracking: Grade 0 |
|
Exposure to natural sunlight for one year |
GB/T 9276 |
Light loss and discoloration: Grade 1; pulverization and cracking: Grade 0 |
|
|
Chemical-resistant |
Immerse in 5% HCl for 7 days |
GB/T11547 | The surface coating remains unchanged. |
|
Immerse in 5% NaOH for 7 days |
GB/T11547 | The surface coating remains unchanged. | |
|
Immerse in 5% NaCl for 7 days |
GB/T11547 | The surface coating remains unchanged. | |







